Справочник Пользователя для Sony SVT-LC300

35

When the VCR detects the tape end or the time counter
shows “5H57M” or “7H57M” (depending on the
setting of the TAPE switch) during recording, the
output level becomes 0 V DC. To resume the 5 V
output, press the operation button (EJECT 6, REC r,
FF ), REW 0 or PLAY z, etc.).

Set TAPE END OUT to –3M or END on the SET UP 3
display.
• –3M: the time counter shows “5H57” (three minutes

before the tape end when using T-120 tape) or
“7H57M” (three minutes before the tape end when
using T-160 tape) and a signal is output from the
TAPE END OUT terminal (recording will be
continued to the end of the tape).

• END: the VCR detects the tape end.

The VCR outputs +12 V from the TIMER OUT
terminal according to the timer setting on the TIMER
SET display. The terminal outputs the signal even if
the timer recording mode is off.

This terminal will help you to know when something
wrong has happened to the VCR during recording.
The VCR outputs a signal from WARNING OUT
terminal.

Timer stops.

Timer starts.

12 V

0 V

COM terminal

 WARNING OUT terminal

5 V

0 V

Tape recording stops.

Recording
mode

Output
signal

Recording
mode

Output
signal

Rewind

Recording

0 V

5 V

Tape end

Beginning of tape

5 V

0 V

Rewind

Tape end

Beginning of tape

Stop

Press operation
button

TIMER OUT terminal

COM terminal

TAPE END OUT terminal

To reset, press STOP 

p

 or EJECT 

6

,

if the clog detection function works and
the VCR gives warning, otherwise,
press ALL RESET.

To turn the clog detection function off, set CLOG
DETECT to N (no) on the SET UP 3 display.

2 sec.

COM terminal