Справочник Пользователя для Pelco ICIMI1000

8

Pelco Manual C1014M-B (10/97)

5.

Verifone uses the Epson Model TM930II as the standard printer on this regis-
ter. If you are using the Epson Model TM950II printer, with 9-pin “D” style
connector, you will need to use the Pelco ICIDRP interface cable.

6.

Set the SW1 switch on the ICIMI1000 interface cable toward the male plug.

®

Refer to the wiring configurations shown in Figure 1 and 2 if you are installing
the Inter-Check

®

 unit more than four feet away from the printer. A maximum of

1,500 feet (457.2 m) of 18 AWG shielded wire is recommended (not provided).

One (1) ICI1000WK wiring kit is provided with the ICI1000SE and ICI1000SI Inter-
Check

®

 unit. This kit includes the following components:

2

RJ14 phone jacks

1

Straight-through 6 conductor phone cable

One (1) ICI2000WK wiring kit is provided with the ICI2000D Inter-Check

®

 unit. This

kit includes the following components:

3

RJ14 phone jacks

1

Straight-through 6 conductor phone cable