Справочник Пользователя для Mitsubishi Electronics MR-MC241
14 - 1
14
14. EMC AND LOW VOLTAGE DIRECTIVES
14. EMC AND LOW VOLTAGE DIRECTIVES
Compliance to the EMC Directive, which is one of the EU Directives, has been a legal obligation for the
products sold in European countries since 1996 as well as the Low Voltage Directive since 1997.
Manufacturers who recognize their products are compliant to the EMC and Low Voltage Directives are required
to declare that print a "CE mark" on their products.
products sold in European countries since 1996 as well as the Low Voltage Directive since 1997.
Manufacturers who recognize their products are compliant to the EMC and Low Voltage Directives are required
to declare that print a "CE mark" on their products.
See
SERIAL A21001999
MR-MC240
Instruction manual.
Voyez
MR-MC240
mode d'emploi.
MADE IN JAPAN
3.3VDC 1.5A
MR-MC240
BC370C286H01
80M1
IND. CONT. EQ.
US
UL
C
LISTED
MITSUBISHI
ELECTRIC
MSIP-REI-MEK-
DATE 2014-02
PASSED
TC510A875G51
(1) Authorized representative in Europe
Authorized representative in Europe is shown below.
Name
Name
: Mitsubishi Electric Europe B.V.
Address
: Gothaer strase 8, 40880 Ratingen, Germany
14.1 Requirements for compliance with the EMC directive
The EMC Directive specifies that products placed on the market must be so constructed that they do not cause
excessive electromagnetic interference (emissions) and are not unduly affected by electromagnetic
interference (immunity)". Section 14.1.1 through Section 14.1.3 summarize the precautions on compliance with
the EMC Directive of the machinery constructed with the position board.
These precautions are based on the requirements and the standards of the regulation, however, it does not
guarantee that the entire machinery constructed according to the descriptions will comply with above-
mentioned directive. The method and judgement for complying with the EMC Directive must be determined by
the person who construct the entire machinery.
excessive electromagnetic interference (emissions) and are not unduly affected by electromagnetic
interference (immunity)". Section 14.1.1 through Section 14.1.3 summarize the precautions on compliance with
the EMC Directive of the machinery constructed with the position board.
These precautions are based on the requirements and the standards of the regulation, however, it does not
guarantee that the entire machinery constructed according to the descriptions will comply with above-
mentioned directive. The method and judgement for complying with the EMC Directive must be determined by
the person who construct the entire machinery.