Справочник Пользователя для Pelco C1300M-C (11/08)

C1300M-C (11/08)

17

(See Page 9)

ExSite IPSXM has two modes of operation: color and black-white. You can increase sensitivity in low 
light conditions by switching to black-white mode (removing the IR cut filter). Color mode is 
preferred in normal lighting conditions.

The following are the settings for the IR cut filter:

The auto IR level is the light level at which the infrared filter switches IN or OUT.

Following are the available settings for the Auto IR Level:

NOTES:  

•

If backlight compensation is ON and the IR cut filter switches OUT in normal lighting 
conditions, adjust the Auto IR Level to a darker setting. Refer to the Backlight Compensation 
section.

•

Low light does not mean no light. Some type of illumination is required (street light, IR light, 
etc.). The camera is not sensitive to IR light when the IR cut filter is IN.

EXIT

LANGUAGE  

ENGLISH

UNIT INVERSION  

OFF

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>

RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

PELCO EXSITE IPSXM

<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>

BACK
EXIT

UNIT SETTINGS

TYPE OF LIGHTING  

T1

AUTO FOCUS  

ON

ZOOM LIMIT  

X184

ZOOM SPEED  

MEDIUM

LOW LIGHT LIMIT  

2

IR CUT FILTER*  

AUTO

  AUTO IR LEVEL*  

DUSK

<ADVANCED SETTINGS>

BACK
EXIT

CAMERA

 * Available only with the 23X day/night camera.

OFF

Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT).

AUTO (default)

Automatic operation is controlled by the Auto IR Level setting.

DUSK (default)  

approximately 6 lux (black - white)
approximately 13 lux (color)

DARK

approximately 0.1 lux (black - white) 
approximately 2 lux (color)