Справочник Пользователя для Pelco C1300M-C (11/08)
18
C1300M-C (11/08)
ADVANCED CAMERA SETTINGS
SHUTTER SPEED
Shutter speed is the duration of the electronic shutter. Program shutter speed to operate
automatically (Auto) or manually (Numeric Value).
automatically (Auto) or manually (Numeric Value).
Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will
eliminate any flicker that may occur in the picture.
eliminate any flicker that may occur in the picture.
AGC LIMIT
AGC Limit allows users to adjust how the system balances AGC (automatic gain control) and
electronic shutter in low light conditions. As scene lighting decreases, the system will automatically
adjust, adding a mixture of AGC and slow shutter according to the AGC LIMIT setting. AGC LIMIT
can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast,
setting AGC LIMIT to 0 will force the system software to apply maximum slow shutter (as defined by
the LOW LIGHT LIMIT setting) before any AGC is applied. The default setting of 28 sets the AGC and
slow shutter balance to favor AGC, yielding more real-time low light images.
electronic shutter in low light conditions. As scene lighting decreases, the system will automatically
adjust, adding a mixture of AGC and slow shutter according to the AGC LIMIT setting. AGC LIMIT
can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast,
setting AGC LIMIT to 0 will force the system software to apply maximum slow shutter (as defined by
the LOW LIGHT LIMIT setting) before any AGC is applied. The default setting of 28 sets the AGC and
slow shutter balance to favor AGC, yielding more real-time low light images.
The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to the Low Light
Limit section).
Limit section).
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
TYPE OF LIGHTING
T1
AUTO FOCUS
ON
ZOOM LIMIT
X184
ZOOM SPEED
MEDIUM
LOW LIGHT LIMIT
2
IR CUT FILTER*
AUTO
AUTO IR LEVEL*
DUSK
<ADVANCED SETTINGS>
BACK
EXIT
EXIT
CAMERA
SHUTTER SPEED
AUTO
AGC LIMIT
28
AUTO IRIS
AUTO
AUTO IRIS LEVEL
91
AUTO IRIS PEAK
16
AUTO SHARPNESS
ON
SHARPNESS LEVEL
26
AUTO WHITE BALANCE
ON
R GAIN
146
B GAIN
294
BACKLIGHT COMP
OFF
VIDEO LEVEL
HIGH
WIDE DYNAMIC RANGE*
OFF
BACK
EXIT
EXIT
ADVANCED SETTINGS
* Available only with the 23X day/night camera.
AUTO (default)
The electronic shutter speed is set automatically by the amount of light
sensed by the camera.
sensed by the camera.
NUMERIC VALUE
The system has several numerical shutter speed settings. The higher the
number, the faster the electronic shutter.
number, the faster the electronic shutter.
The slowest shutter speed setting is 2 = 1/2 second
The fastest setting is 30,000 = 1/30,000 second
The fastest setting is 30,000 = 1/30,000 second
Increasing the shutter speed lowers the light sensitivity and reduces the
streaking of fast moving objects.
streaking of fast moving objects.