Справочник Пользователя для Pure Digital 200i
6
Switching between Sleep, Standby and On
Contour has three power modes, Standby, Sleep and On. In Standby, Contour uses minimal power
(Status LED is bright red). In Sleep mode, Contour remains connected to the wireless network
(once attached) and is waiting for a source to be selected (the Status LED is dimmed red).
(Status LED is bright red). In Sleep mode, Contour remains connected to the wireless network
(once attached) and is waiting for a source to be selected (the Status LED is dimmed red).
To enter Sleep mode, press Standby. Contour will automatically enter Sleep mode if it does not
receive any audio from AirPlay or an iPod/iPhone/iPad.
Once in Sleep mode, press Standby to switch to On.
receive any audio from AirPlay or an iPod/iPhone/iPad.
Once in Sleep mode, press Standby to switch to On.
To enter Standby, press and hold Standby for four seconds on Contour, or the remote until the
Status LED is bright red.
Status LED is bright red.
Press Standby to switch straight to On. Contour will flash red for around
30 seconds, pause, and then return to the state that Contour was in before Standby.
Network setup
Co
ntour can be connected to your network using a wireless or wired connection.
We recommend using the wireless connection method, which allows you to position your Contour
anywhere within range of your wireless connection. See page 7 for more information.
To use the wired connection method, connect an Ethernet cable between the Ethernet port on the
back of Contour and one of the available Ethernet ports on your router. You might want to use this
method if you experience sound quality problems or if your Contour is located near your router.
See page 10 for more information.
anywhere within range of your wireless connection. See page 7 for more information.
To use the wired connection method, connect an Ethernet cable between the Ethernet port on the
back of Contour and one of the available Ethernet ports on your router. You might want to use this
method if you experience sound quality problems or if your Contour is located near your router.
See page 10 for more information.
Front panel Status LED
When Contour is powered, the Status LED is visible through the front speaker mesh. The Status
LED is also used to indicate the various states of Contour, by colour.
LED is also used to indicate the various states of Contour, by colour.
Red
Standby (bright) / Starting up (bright flashing) / Sleep (dimmed)
Blue
iPod/iPhone/iPad dock is active (flashing indicates that the connection to
the docked product is preparing and also indicates remote activity)
the docked product is preparing and also indicates remote activity)
White
AirPlay is active (fast flashing indicates remote activity) (slow flashing
indicates network connectivity problems)
indicates network connectivity problems)
Pink
Aux In is active (fast flashing indicates remote activity)
Blue/Green
(Alternate flashing) Temporary wireless network setup
Cyan
Flashing indicates a software error
Amber
Updating software
Note: For quick reference, there is a sticker on the base of Contour which indicates the most
common Status LED states.
common Status LED states.