Справочник Пользователя для Pure Digital 200i

7

1.   Position Contour in range of your 

wireless network.

2.   Insert the connector of the mains 

power adapter into the socket on 
the rear of Contour. 

3.   Plug in to the mains supply.

4.   When the red Status LED on the front has stopped flashing, Contour is in Sleep mode. 

Stage 1: Prepare Contour for wireless setup

Preparing Contour to use 
AirPlay with Wi-Fi

Introduction

There are five stages in preparing Contour to use AirPlay if you are connecting Contour to your 
network with a wireless connection. Skip this section if you are using the wired connection 
method (see page 10).

1.   Prepare Contour for wireless setup.
2.   Create a connection between Contour and your setup device (any device with Wi-Fi and a 

browser, such as an iPhone or laptop), by using a temporary wireless network.

3.   Access Contour Setup Manager.
4.   Assign Contour a unique name.
5.   Add Contour to your wireless network.