Справочник Пользователя для Beko DCU 7230

16 EN

Your dryer will give an audio warning when 

the programme comes to an end. If you do 

not want to hear the audio warning, press 

“Cancel Audio Warning” button. The relevant 

light will turn on when this button is pressed 

and an audio warning will not be given when 

the programme comes to an end.

C

  You can select this function either before 

or after the programme starts. 

C

  Warning indicators may differ according 

to the model of your dryer.

A warning light will turn on to remind filter 

cleaning after the programme finishes.

C

  If the filter cleaning warning light lights up 

continuously, please refer to, “Suggested 

solutions for problems”.

Warning light starts flashing when the tank is 

filled with water. The dryer stops operating if 

the warning light turns on when a programme 

is running. Drain the water in the water tank 

to restart the dryer. Press “Start/Pause/

Cancel” button to start the programme 

after you have emptied the water tank. The 

warning light turns off and the programme 

resumes operating.

If you wish to dry your clothes at a later time, 

thanks to the time delay function, you can 

delay the programme start up to 3 hours, 6 

hours or 9 hours.

1.  Open the loading door and put the 

laundry in.

C

  Make sure that all air outlets are open, 

door filter is cleaned and the water tank 

is empty.

2.  Set the drying programme and, if 

required, the auxiliary functions.

3.  When the time programming button is 

pressed once, a 3 hour delay is selected 

and the relevant led lights. When the 

same button is pressed again, 6 hours; 

and if pressed once more, 9 hours delay 

will be selected. If the time programming 

button is pressed one more time, time 

delaying function will be cancelled. Set 

the time delay as you require.

4.  Delayed operation of the selected 

programme is started by pressing 

the "Start/Pause/Cancel" button after 

selecting the time delay. 

C

  Additional laundry may be loaded / taken 

out during the time delay period.

C

  During the time delay period, laundry 

is rotated for 4 seconds in every 10 

minutes to prevent creasing.

If you want to cancel the time delay 

countdown and start the programme:

1.  Press “Start/Pause/Cancel” button for 

about 3 seconds. 

2.  Press “Start/Pause/Cancel” button to 

start the programme right away.

1.  Press “Start/Pause/Cancel” button to 

start the programme.

2.  Light of the “Start/Pause/Cancel” 

button will turn on to indicate that the 

programme has started.

Progress of a running programme is shown 

through the programme follow-up indicator.

At the beginning of every programme step, 

the relevant indicator LED will light up and 

light of the completed step will turn off.

- Drying level will be illuminated during the 

whole drying process until the drying degree 

reaches “iron dry”.

- Starts to illuminate when the drying 

degree reaches “iron dry” step and remains 

illuminated until the next step.

Starts to illuminate when the drying degree 

reaches “Ready to wear” step and remains 

illuminated until the next step.

- Illuminates when the programme comes 

to an end and anti-creasing function is 

activated.

C

 If more than one LED light up or 

flash concurrently, it means there is 

malfunctioning or a failure (please see, 

Solution suggestions for problems).

You can use this feature to dry your clothes 

under higher or lower temperatures after your 

dryer has started.

For example;

1.  Press and hold the “Start/Pause/Cancel” 

button for about 3 seconds to “Cancel” 

the programme in order to select “Extra 

Dry” programme instead of “Iron Dry” 

programme. 

2.  Select the “Extra Dry” programme by 

rotating the programme selection button.