Справочник Пользователя для Beko DCU 7230

17 EN

3.  Press “Start/Pause/Cancel” button to 

start the programme.

C

  Press “Start/Pause/Cancel” button for 

3 seconds to cancel the programme 

or turn the programme selection knob 

in any direction to end the programme 

while the machine is running. Water tank 

and filter cleaning warning lights turn on 

to warn the user when the programme is 

cancelled by pressing the “Start/Pause/

Cancel” button for 3 seconds. However, 

the warning lights do not turn on when 

the programme is cancelled by turning 

the programme selection knob. Only the 

drying light turns on and the machine 

remains in hold until a new programme 

is selected and the “Start/Pause/Cancel” 

button is pressed. Child-proof lock of the 

machine should not be active in order 

to perform these two operations. If the 

child-proof lock is active, deactivate it 

before performing these operations.

In order to add or remove laundry after the 

programme starts:

1.  Press the “Start/Pause/Cancel” button 

to switch the dryer to “Pause” mode. 

Drying process will stop.

2.  Open the door at “Pause” position and 

close it again after adding or taking out 

laundry.

3.  Press “Start/Pause/Cancel” button to 

start the programme.

C

  Any laundry added after the drying 

process has started may cause the dried 

clothes in the machine intermingle with 

wet clothes and the result will be wet 

laundry after the drying process is over.

C

  Laundry may be added or taken out 

as much as desired during a drying 

process, but this process will extend 

the programme duration and increase 

energy consumption since the drying will 

be interrupted continuously. Therefore, it 

is recommended to add laundry before 

the drying programme has started.

There is a child-proof lock to prevent any 

programme interruption due to the pressing 

of button while the programme is running. 

The loading door and all buttons except 

the “On/Off” button on the control panel 

are deactivated when the child-proof lock is 

active.

Press the “Start/Pause/Cancel” and “Cancel 

audio warning” buttons simultaneously for 3 

seconds to activate the child-press lock. 

To start a new programme after the programme 

is over or to interrupt the programme, the child-

proof lock should be deactivated. Press the same 

buttons for 3 sec. again to deactivate the child-

proof lock.

C

  Child-proof lock is deactivated when the 

machine is restarted by pressing the On/

Off button.

C

  Press the relevant buttons for 3 seconds 

to activate the child-proof lock. A long 

beep will be heard and the child-proof 

lock will be activated. A double beep 

will be heard if you press any button 

or turn the programme selection knob 

while the child-proof lock is active. Press 

the buttons for 3 seconds to deactivate 

the child-proof lock. Single beep will 

be heard and child-proof lock will be 

deactivated.

A

 A double beep will be heard if you turn 

the programme selection knob when 

the machine is running and the child-

proof lock is active. If you deactivate 

the child-proof lock without returning 

the programme selection knob to its 

previous position, the programme will 

be terminated since the position of the 

programme selection knob is changed. 

The drying light turns on and the 

machine remains on hold until a new 

programme is selected and the “Start/

Pause/Cancel” button is pressed.

To cancel any selected programme:

Press “Start/Pause/Cancel” button for about 

3 seconds. The “Filter cleaning”, “Water tank” 

and “End/ Anti-creasing” warning lights will 

turn on at the end of this period for reminding 

purposes.

A

 As the inside of the dryer will be 

excessively hot when you cancel the 

programme while the dryer is running, 

activate the ventilation programme to 

cool it down.