Справочник Пользователя для ARRI ARRIFLEX 235

The display configuration can be set individually. 

The two shown combinations are possible:

The desired display configuration can be set in Mode 3:

•  Change from Mode 1 to Mode 3 by depressing the 

“MODE”-button twice.

•  Depress the “SEL”-button twice; the first digit in the 

upper display line blinks.

•  Within three seconds, depress the “SET”-button. 

•  The currently set counting value of Mode 3 is displayed. 

The corresponding counting value in Mode 1 is auto-

matically altered.

•  Change to the mode which shows the total amount of 

exposed film (“MODE”-button).

•  The total exposed film counter can be set to zero by 

depressing the “SET”-button (for at least 1.5 seconds) 

while in standby.

•  The take length counter is automatically reset each time 

the camera is started.

•  Change from Mode 1 to Mode 3 by depressing the 

“MODE”-button twice.

•  Depress the “SEL”-button once; the symbol m/ft blinks.

•  Depress the “SET”-button within three seconds to 

change the unit of measurement.

•  As long as the “PHASE”-button is depressed while in 

standby, the set angle of the mirror shutter appears in 

the upper display line. 

The camera runs at inching speed.

Setting the shutter angle: see Chapter 7.