Справочник Пользователя для ARRI ARRIFLEX 235

Standby Operation

•  Change from Mode 1 to Mode 2 by depressing the 

“MODE”-button once.

•  Depress the “SEL”-button repeatedly until the digit to 

be set blinks.

•  Depress the “SET”-button repeatedly until the desired 

value is reached.

•  Repeat this procedure until all digits are set to the 

desired values. A final confirmation of the set frame 

rate is not necessary.

Note: 

The frame rate can be set between 1 and 60 fps 

forward and 25 fps reverse.

Note: 

The programmed frame rate is stored in a non-

volatile memory.

Standby Operation

•  Change from Mode 1 to Mode 2 by depressing the 

“MODE”-button once.

•  Depress the “SEL”-button; “Cd” (Camera direction) blinks.

•  Hold the “SET”-button depressed for more than three 

seconds. The display shows an “R” for reverse 

operation at the bottom left.

By means of the “NORM” and “PS/CCU”-buttons it is 

possible to switch between the standard frame rate 

(“NORM”) and the pro-grammed frame rate (“PS/CCU”) 

while the camera is running.