Справочник Пользователя для Panasonic AG-HPX600EN

– 143 –

SET01:TC/UB

Sets the time code or user bits.

When an item other than [UB] is selected for the counter display on the [HOME] screen, the time code setting screen appears, and when 

[UB] is selected on the [HOME] screen, the user bits setting screen appears.

r

 

f

To set the time code, press the <%/REW> button to change to the time code setting mode.

 

f

The setting values of each digit of the time code are from 

[0] to [9]  (decimal).

<%/REW> button

Starts and exits the time code setting mode.

 

f

The time code setting is applied when the setting 

mode exits.

When the <%/REW> button is pressed, [SET] is 

displayed in black and white inversion, and the time 

code setting mode is set.

When the <%/REW> button is pressed again, 

[SET] returns to the normal display, and the time 

code setting mode exits.

<STOP> button

Selects the advance setting mode for the built-in 

time code generator.

Use this function to advance the time code 

continuously, regardless of the P2 card recording 

operation. Set to this position to, for example, set 

the time code to the current time or externally lock 

the time code.
[R-RUN]

Use this function to advance the time code only 

during recording. A time code recorded normally will 

be continuously recorded.

 

f

If a clip is deleted, or if the frame rate is set to 

[24P]/[24PA] and the recording continues to 

a frame other than [24P]/[24PA], continuous 

recording may fail.

<FF/)> button

[−]

Decreases the setting value of the selected digit in the time code.

<PLAY/PAUSE> button

[+]

Increases the setting value of the selected digit in the time code.

<COUNTER> button

Switches to the user bits setting screen.

<RESET> button

Resets all time code setting values to 0.

<MONITOR SEL> button

[→]

Moves the selected digit in the time code to the right. When the selected digit moves to the right edge, it 

moves back to the left edge.

r

 

f

To set the user bits, press the <%/REW> button to change to the user bits setting mode.

 

f

The setting values of each digit of the user bits are from 

[0] to [F]  (hexadecimal).

<%/REW> button

Starts and exists the user bits setting mode.

 

f

The user bits setting is applied when the setting 

mode exits.

When the <%/REW> button is pressed, [SET] is 

displayed in black and white inversion, and the user 

bits setting mode is set.

When the <%/REW> button is pressed again, 

[SET] returns to the normal display, and the user 

bits setting mode exits.

<STOP> button

Switches to the advance setting mode for the built-in time code generator. The setting contents are the 

same as when [TCG] is selected.

<FF/)> button

[−]

Decreases the setting value of the selected digit in the user bits.

<PLAY/PAUSE> button

[+]

Increases the setting value of the selected digit in the user bits.

<COUNTER>

Switches to the user bits setting screen.

<RESET> button

Resets all user bits setting values to 0.

<MONITOR SEL> button

[→]

Moves to the right of the selected digit in the user bits. When the selected digit moves to the right edge, it 

moves back to the left edge.

         indicates factory setting values.