Справочник Пользователя для Panasonic AG-HPX600EN

– 144 –

SET02:MON/HDMI 

FORMAT

Sets the formats of video output from the <MON OUT> and <HDMI> terminals.

<%/REW> button

Sets the signal format type output from the <MON 

OUT> terminal.

With this setting, the signal format to be out put 

from the <HDMI> terminal is also switched.

Displayed only in the HD mode.

The SDI signal is output according to the setting 

of the [SYSTEM MODE] item on the setting menu 

[SYSTEM SETUP] screen.

 

f

The 1080i or 720P signal is also output from the 

<HDMI> terminal according to the [SYSTEM 

MODE] item setting.

 

f

For [1080-23.98PsF], the signal pulled down to 

1080/59.94i is output from both <MON OUT> and 

<HDMI> terminals.

Displayed only in the HD mode.

The SDI signal of 480i or 576i is output.

 

f

The 480P or 576P signal is output from the 

<HDMI> terminal.

Displayed only in the SD mode.

According to the setting of the [SYSTEM MODE] 

item on the setting menu [SYSTEM SETUP] screen, 

the SDI signal of 480i or 576i.

 

f

The 480P or 576P signal is output from the 

<HDMI> terminal.

A composite video signal is output.

 

f

The 480P or 576P signal is output from the 

<HDMI> terminal.

<STOP> button

Sets the aspect for the down-conversion output 

signal in the HD mode. This item is not displayed in 

the SD mode.

Side-crop mode (Crops the left and right edges.)
[L.BOX]

Letterbox mode (Adds black bands at the top and 

bottom of the image.)
[SQU]

Squeeze mode (Squeezes images horizontally.)

SET03:MON/HDMI 

SETUP

Sets the output setting of the <MON OUT> and <HDMI> terminal.

<%/REW> button

Enables or disables the output from the <MON 

OUT> terminal.

<STOP> button

Specifies whether characters are superimposed 

over the output from <MON OUT>, <HDMI>, and 

<REMOTE> terminals.

This setting is disabled when a remote control unit (AG-EC4G) is connected, and the settings on the 

remote control unit or extension control unit supersede.

<FF/)> button

Specifies whether the zebra pattern is 

superimposed over the output from <MON OUT>, 

<HDMI>, and <REMOTE> terminals.

 

f

This setting is not available when the setting 

menu on the viewfinder screen is open.

SET04:LCD

Performs the display settings of SmartUI.

<FF/)> button

[−]

Decreases the setting value of the selected item. Press and hold this button to continuously decrease the 

setting value.

<PLAY/PAUSE> button

[+]

Increases the setting value of the selected item. Press and hold this button to continuously decrease the 

setting value.

<RESET> button

Resets the setting value of the selected item to its factory setting value.

<MONITOR SEL> button

[→]

Moves the item selection to the right. When the item selection moves to the right edge, it moves back to 

the left edge.
[BACK LIGHT]

Sets the luminance of SmartUI.

Sets the contrast of SmartUI.

 

f

 The SmartUI screen may be hidden depending 

on the setting value.
In such a case, press the <HOME> to return to 

the [HOME] screen and hold down the <LIGHT> 

and <RESET> buttons. The setting value of 

[CONTRAST] is reset to the factory setting.

         indicates factory setting values.