Справочник Пользователя для Intel Server Board S5500HCV S5500HCVR

 

The server boards have several 3-pin jumper blocks that you can use to configure, protect, or 
recover specific features of the server boards.  

The following symbol identifies Pin 1 on each jumper block on the silkscreen: ▼ 

 

1-2 

These pins should have a jumper in place for normal system operation. 
(Default) 

J1E6: CMOS Clear 

2-3 

If pins 2-3 are connected when AC power unplugged, the CMOS settings clear 
in 5 seconds. Pins 2-3 should not be connected for normal system operation. 

1-2 

ME Firmware Force Update Mode – Disabled (Default) 

J1E2: ME Force 
Update 

2-3 

ME Firmware Force Update Mode – Enabled 

1-2 

These pins should have a jumper in place for normal system operation. 
(Default)

 

J1E4: Password Clear 

2-3 

To clear administrator and user passwords, power on the system with pins 2-3 
connected. The administrator and user passwords clear in 5-10 seconds after 
power on. Pins 2-3 should not be connected for normal system operation. 

1-2 

Pins 1-2 should be connected for normal system operation. (Default) 

J1E5: BIOS Recovery 

2-3 

The main system BIOS does not boot with pins 2-3 connected. The system only 
boots from EFI-bootable recovery media with a recovery BIOS image present.