Справочник Пользователя для Samsung VP-D11

Скачать
Страница из 83
22
ENGLISH
ESPAÑOL
Preparing
Preparación
To use the Lithium Ion Battery Pack
The amount of continuous recording time available depends on :
-
The type and capacity of battery pack you are using.
-
How much you use the Zoom function.
It is, recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Lift the viewfinder up and attach the 
battery pack to the camcorder.
2. Connect the AC Power adapter to an AC
cord and connect the AC cord to a wall
socket.
3. Connect the DC cable to the DC jack
socket on the camcorder.
4. Turn the Camera power switch to off,  
the charging indicator will start to flash
showing that the battery is charging.
5. When it has finished charging, disconnect the battery and AC Power
adapter from the camcorder.
-  Even with the power switched off, the battery will still discharge is left
connected to the camcoder.
Reference
The battery pack may be charged a little at the time of purchase.
To prevent reduction in the life and capacity of the battery pack, 
always remove it from the camcorder after it is fully charged.
Using the Lithium Ion Battery Pack
Blinking time
Charging rate
Once in a second
Less than 50%
Twice in a second
50% ~ 75%
Three times in a second
75% ~ 100%
On for a second and 
Error - Reset the battery and 
off for a second
DC cable.
La cantidad de tiempo de filmación contínuo depende de:
-
El tipo y la capacidad de la batería que utilice.
-  La frecuencia de uso de la función Zoom.
Es recomendable que tenga preparadas varias baterías.
Carga de la batería de iones de litio
1. Levante el visor y acople la batería a la 
videocámara.
2. Conecte el Adaptador de corriente CA 
a un cable CA y enchufe éste a una
toma eléctrica.
3. Conecte el cable CC a la salida CC
de la videocámara.
4. Ponga el interruptor POWER de la cámara 
en posición de apagado, el indicador de 
carga empezará a parpadear lo que indica 
que la batería se está cargando.
5. Cuando haya finalizado, desconecte la batería y el adaptador de 
corriente CA de la videocámara.
- Incluso con el interruptor de encendido en la posición de apagado, 
la baterá se descargará si se deja acoplada a la videocámara.
Notas
La batería puede estar un poco cargada cuando la adquiera.
Para evitar reducir la vida útil y la capacidad de la batería, sáquela
siempre de la videocámara depués de cargarla.
Para utilizar la batería de iones de litio
Uso de la batería de iones de litio
Tiempo de parpadeo
Velocidad de carga
Una vez cada segundo 
Menos del 50%
Dos veces cada segundo 
Del 50% al 75%
Tres veces cada segundo 
Del 75% al 100%
Encendido un segundo y
Error – Restablezca la batería y
apagado un segundo 
el cable CC.
2
3
1
4