Справочник Пользователя для Mitel 2700-1398-B1
Mitel NuPoint Messenger Technical Documentation - Release 7.0
LCOS for the Administrator’s and Attendant’s Mailboxes
For best results, assign the default LCOS (LCOS 1) to both the administrator’s and the
attendant’s mailboxes. LCOS 1, with the appropriate FCOS and GCOS, supports the special
functions for these mailboxes.
attendant’s mailboxes. LCOS 1, with the appropriate FCOS and GCOS, supports the special
functions for these mailboxes.
Interaction Between an LCOS and FCOS
When you assign an LCOS and FCOS to a mailbox, be aware that certain options interact within
and between these Classes of Service; some options require the other options, and some
combinations of options conflict.
and between these Classes of Service; some options require the other options, and some
combinations of options conflict.
In particular, the LCOS can affect how the FCOS functions. For example, if you allow a mailbox
owner to make messages and the LCOS that has a user message length of 0 seconds, the user
cannot record a message.
owner to make messages and the LCOS that has a user message length of 0 seconds, the user
cannot record a message.
Using the Worksheet
Use an LCOS Worksheet (Figure 8-1) to organize the information you need to create an LCOS
and assign it to mailboxes. Fill in the fields according to the information listed in “LCOS
Parameter Descriptions” in this chapter.
and assign it to mailboxes. Fill in the fields according to the information listed in “LCOS
Parameter Descriptions” in this chapter.
Numbering an LCOS
Assign a number, from 1 to 640, for the new LCOS in “Limits COS.” To conserve database
space, create LCOSs in blocks of 64. For example, create 1-64, then 65-128, and so forth.
space, create LCOSs in blocks of 64. For example, create 1-64, then 65-128, and so forth.
Naming an LCOS
Assign a name to identify the LCOS, up to 15 alphanumeric characters.
Setting Limits
Assign a value to each parameter that you want to set and include in the LCOS. For example, to
set the Message Count limit, enter 30 in the “Maximum number of messages” box. If a current
value is acceptable, write “OK” on the worksheet to indicate that you do not need to change that
value.
set the Message Count limit, enter 30 in the “Maximum number of messages” box. If a current
value is acceptable, write “OK” on the worksheet to indicate that you do not need to change that
value.
Selecting the Prompts Language
The default language for all line groups is American
English Mnemonic Prompts; other languages and Prompt sets are optional features that must be
installed before you can select one as a language for an LCOS.
installed before you can select one as a language for an LCOS.
For details about using Prompt sets within the application, see chapters 2 and 7. For details about
specific Prompts sets and their availability, contact your support representative.
specific Prompts sets and their availability, contact your support representative.
Figure 8-1
Sample LCOS Worksheet
LCOS Parameter Descriptions
This section describes all LCOS parameters by menu group.
©Copyright 2002, Mitel Networks Corporation
110