Справочник Пользователя для Mitel 2700-1398-B1
Mitel NuPoint Messenger Technical Documentation - Release 7.0
Verify Configuration Parameters
CP 5015
Applications
These are the applications provided with your NuPoint Messenger server. Your server may use
one or more of them. Each of these applications must be in a separate
one or more of them. Each of these applications must be in a separate
line group
(a group of
telephone lines connected to the server) if you have more than one application running, with the
exception of NP Receptionist and NuPoint Agent™.
exception of NP Receptionist and NuPoint Agent™.
NuPoint Voice Application
This is the basic business application, used for message taking and retrieval. Most of the
modifiers discussed later are explained in terms of this application. In addition, many of the
modifiers are discussed in some detail in the NuPoint Voice Application chapter.
modifiers discussed later are explained in terms of this application. In addition, many of the
modifiers are discussed in some detail in the NuPoint Voice Application chapter.
DID NuPoint Voice Application
Similar to the NuPoint Voice application, but for direct-inward dial telephone lines. The hardware
setup is very different, and additional configuration steps are needed.
setup is very different, and additional configuration steps are needed.
Pager Application
This application is used for a number of features that place telephone calls out of the server.
Paging
can call a radio pager to let the user know there is a message waiting. The user must call
into the server to receive the message.
Message delivery
calls a telephone and allows the user to
log in and receive a message.
Call placement
calls a telephone number to deliver a message.
Some optional features, such as NuPoint Fax™ and Cut-through Paging, also use this application
to place outdials.
to place outdials.
Message Waiting Applications
These applications allow a message waiting indicator at users’ phones to signal that a new
message has arrived. Typically, these indicators are lights, but this depends on the telephone
equipment and switch installed. The software supports 24 kinds of message waiting indicators.
message has arrived. Typically, these indicators are lights, but this depends on the telephone
equipment and switch installed. The software supports 24 kinds of message waiting indicators.
Optional Features
Optional features are not discussed in this manual. If you purchase them, you will receive the
documentation to place in your Optional Features Manual. However, they are configured with
many of the same modifiers discussed in this manual. Optional features often purchased are
listed below.
documentation to place in your Optional Features Manual. However, they are configured with
many of the same modifiers discussed in this manual. Optional features often purchased are
listed below.
•
AMIS Analog Network
• NP
WakeUp
• NuPoint
Agent
•
Call Detail Recorder
• NP
CSO
• Cut-Through
Paging
©Copyright 2002, Mitel Networks Corporation
8