Справочник Пользователя для Pelco C490M-D (1/96)
2
Pelco Manual C490M-D (1/96)
2.0 SCOPE
The information within this manual covers the installa-
tion of the HS1000 High Security Camera Enclosure.
tion of the HS1000 High Security Camera Enclosure.
Installation should be in accordance with all applicable
local and national electric codes, utilizing approved ma-
terials only.
local and national electric codes, utilizing approved ma-
terials only.
3.0 DESCRIPTION
The HS1000 is a large, high-security camera enclosure
designed for indoor “corner mount” installation for such
applications as parking garages, prisons, detention cells,
etc., requiring maximum protection from vandalism.
designed for indoor “corner mount” installation for such
applications as parking garages, prisons, detention cells,
etc., requiring maximum protection from vandalism.
Constructed of heavy gauge steel, the HS1000 will ac-
cept most 2/3-inch format cameras with fixed focal
length lenses ranging in size from 4 mm to 75 mm.
There is no exposed mounting hardware securing the
HS1000 to its mounting surface. Opening the enclo-
sure can only be accomplished with a specially designed
tool, eliminating the possibility of the enclosure being
opened by unauthorized personnel. In addition, a fac-
tory-installed tamper switch is mounted on the secured
access cover.
cept most 2/3-inch format cameras with fixed focal
length lenses ranging in size from 4 mm to 75 mm.
There is no exposed mounting hardware securing the
HS1000 to its mounting surface. Opening the enclo-
sure can only be accomplished with a specially designed
tool, eliminating the possibility of the enclosure being
opened by unauthorized personnel. In addition, a fac-
tory-installed tamper switch is mounted on the secured
access cover.
Designed to fit flush to the ceiling in a corner, an op-
tional hood (HS1000H) allows the HS1000 to be
mounted lower on the wall and still retain the integ-
rity of the enclosure. Provisions are made for mount-
ing 4-inch (10.16 cm) speakers on either side of the
enclosure. The hinged front is supplied with an im-
pact-resistant Lexan window with adequate area for
the installation of an infrared illuminator.
tional hood (HS1000H) allows the HS1000 to be
mounted lower on the wall and still retain the integ-
rity of the enclosure. Provisions are made for mount-
ing 4-inch (10.16 cm) speakers on either side of the
enclosure. The hinged front is supplied with an im-
pact-resistant Lexan window with adequate area for
the installation of an infrared illuminator.
4.0 INSTALLATION
Before installing the HS1000 to a wall/ceiling, make
certain that the mounting surfaces are able to support
the full weight of the enclosure, plus the camera/lens
and any other options, (i.e., speakers, infrared illumi-
nators, heater/blower kits and/or hoods).
certain that the mounting surfaces are able to support
the full weight of the enclosure, plus the camera/lens
and any other options, (i.e., speakers, infrared illumi-
nators, heater/blower kits and/or hoods).
The tilt table and the tilt table mounting bracket may
be removed to provide adequate clearance for mount-
ing the enclosure.
be removed to provide adequate clearance for mount-
ing the enclosure.
The front cover and bottom plate can be removed from
the mounting frame to simplify installation.
the mounting frame to simplify installation.
NOTE: The eight (8) to twelve (12) fasteners
required to secure the HS1000 to a wall/ceiling
(minimum 3/8-inch diameter fasteners
recommended) are not supplied.
required to secure the HS1000 to a wall/ceiling
(minimum 3/8-inch diameter fasteners
recommended) are not supplied.