Справочник Пользователя для Pelco PMC14EX
Pelco Manual C929M-B (2/97)
9
3.2 FRONT PANEL CONTROLS
Refer to Figure 8. Set the controls on the front panel of the monitor as follows:
1.
Set the PAL/NTSC switch for NTSC video format if you have a PMC14E moni-
tor. Set the switch for PAL video format if you have a PMC14EX monitor.
tor. Set the switch for PAL video format if you have a PMC14EX monitor.
2.
Set the VTR/VIDEO switch for the signal input that you are using.
•
Select VTR if you want to play a VCR that is connected to the VTR termi-
nals on the back of the monitor.
nals on the back of the monitor.
•
Select VIDEO if you want video and audio from equipment that is con-
nected to inputs 1 and/or 2 on the back of the monitor.
nected to inputs 1 and/or 2 on the back of the monitor.
3.
If you selected VTR signal input in step 2, the VIDEO 1/VIDEO 2 and AUTO/
MANUAL switches are non-functional.
MANUAL switches are non-functional.
If you selected VIDEO signal input in step 2, set the AUTO/MANUAL switch to
MANUAL if you are using only one input (input 1 or input 2). Then set the
VIDEO 1/VIDEO 2 switch for the input that you are using.
MANUAL if you are using only one input (input 1 or input 2). Then set the
VIDEO 1/VIDEO 2 switch for the input that you are using.
If you are using inputs 1 and 2, set the AUTO/MANUAL switch to MANUAL if
you want to switch between the inputs manually using the VIDEO 1/VIDEO 2
switch.
you want to switch between the inputs manually using the VIDEO 1/VIDEO 2
switch.
If you are using inputs 1 and 2, set the AUTO/MANUAL switch to AUTO if you
want the monitor to switch back and forth automatically between the two in-
puts. If you select AUTO, the VIDEO 1/VIDEO 2 switch is non-functional. You
will set the dwell time for switching between the inputs in step 9.
want the monitor to switch back and forth automatically between the two in-
puts. If you select AUTO, the VIDEO 1/VIDEO 2 switch is non-functional. You
will set the dwell time for switching between the inputs in step 9.
4.
Turn on the power. The LED next to the power switch will light. After about 10
seconds, a picture will appear on the monitor.
seconds, a picture will appear on the monitor.
5.
Adjust the BRIGHTNESS and CONTRAST controls to obtain optimum picture
quality.
quality.
6.
Adjust the COLOR and TINT controls for desired picture color.
7.
Adjust the SHARPNESS control to obtain optimum picture quality.
8.
Adjust the VOLUME control for an appropriate audio volume.
9.
Adjust the TIME control to obtain the desired dwell time for automatically switch-
ing back and forth between inputs 1 and 2. This function only operates if the
AUTO/MANUAL switch is in the AUTO position.
ing back and forth between inputs 1 and 2. This function only operates if the
AUTO/MANUAL switch is in the AUTO position.
Figure 8. Front Panel Controls
TINT
COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
TIME
VOLUME
MANUAL
VIDEO 2
VIDEO
NTSC
PAL
VTR
VIDEO 1
AUTO
POWER