Справочник Пользователя для Pelco PMC14EX
Pelco Manual C929M-B (2/97)
7
Input 1 (Dedicated Monitor Application - Video Only, No Camera
Control)
Control)
1.
Refer to Figure 5. Connect the video cable from the camera to the IN connec-
tor of Input 1 on the feed monitor. Connect another video cable from the OUT
connector of the feed monitor to the video switcher or matrix control equip-
ment.
tor of Input 1 on the feed monitor. Connect another video cable from the OUT
connector of the feed monitor to the video switcher or matrix control equip-
ment.
2.
Set the 75-ohm/HIGH switch for HIGH.
Figure 5. Dedicated Monitor Application with No Control
AC INPUT
INPUT
INPUT
OUTPUT
OUTPUT
VIDEO
AUDIO
INPUT 1
INPUT 2
VIDEO 2
AUDIO
OUTPUT
VIDEO
AUDIO
VIDEO
AUDIO
IN
OUT
75 ohm
HIGH
FEED MONITOR
VIDEO SWITCHER
OR MATRIX
SET FOR HIGH
VIDEO INPUT
Output Connections
Refer to Figure 6. To loop the video and audio signals from the monitor to another
monitor, connect cables from the OUTPUT connectors of the monitor to the INPUT
1 or INPUT 2 connectors of the next monitor.
monitor, connect cables from the OUTPUT connectors of the monitor to the INPUT
1 or INPUT 2 connectors of the next monitor.
Figure 6. Output Connections
SET FOR 75 OHMS
SET FOR 75 OHMS
AC INPUT
INPUT
INPUT
OUTPUT
OUTPUT
VIDEO
AUDIO
INPUT 1
INPUT 2
VIDEO 2
AUDIO
OUTPUT
VIDEO
AUDIO
VIDEO
AUDIO
IN
OUT
75 ohm
HIGH
AC INPUT
INPUT
INPUT
OUTPUT
OUTPUT
VIDEO
AUDIO
INPUT 1
INPUT 2
VIDEO 2
AUDIO
OUTPUT
VIDEO
AUDIO
VIDEO
AUDIO
IN
OUT
75 ohm
HIGH