Справочник Пользователя для Pelco MPS524DT/220

6

Pelco Manual C545M-E (2/02)

1.

Attach the mating connector to the connector on the rear of the scanner control.

2.

Attach the other end of the cable to the scanner.

3.

Plug the power cord on the back of the scanner control into a 120 VAC outlet
(MPS5DT and MPS524DT models) or a 230 VAC outlet (MPS524DT/220 model).

Turn the control on and test its operation using the following procedures:

Move the rocker switch to the “MANUAL” position.

When you move the other rocker switch to the “LEFT” position, the scanner pans to the left.
When you move it to the “RIGHT” position, the scanner pans to the right.

Move the rocker switch to the “AUTO” position.

The scanner pans to the right until it reaches its limit, then pans to the left.

The scanner automatically continues right/left panning until the “MANUAL” switch is set
again or the scanner is turned off.

Left/Right:

Rocker switch, LEFT/RIGHT

Auto Scan:

Rocker switch, AUTO/MANUAL

Power:

Rocker switch, ON/OFF

Pilot Lamp:

Long life neon

Input Voltage

MPS5DT, MPS24DT: 120 VAC, 50/60 Hz
MPS524DT/220:

230 VAC, 50/60 Hz

Output Voltage

MPS5DT:

120 VAC

MPS24DT:

24 VAC

MPS524DT/220:

24 VAC

Maximum Power
Requirements:

—

—

17.5 VA

30 VA

—

8.8 VA

13 VA

—

—

20 VA

8.8 VA

13 VA

—

—

20 VA

Fuse Protection

MPS5DT:

1/4 ASB

MPS524DT:

1/2 ASB

MPS524DT/220:

2/10 ASB