Справочник Пользователя для Pelco SB19-1/SB1901
6
Pelco Manual C467M-D (5/95)
13. Attach the dome to the pan/tilt by aligning the two
ball studs protruding through the flange of the dome
with the two holes in the dome attachment brack-
ets and engaging the studs.
with the two holes in the dome attachment brack-
ets and engaging the studs.
14. Attach the safety chain on the side of the back box
to the short 4-40 threaded screw in the 12.5" round
faceplate trim with the provided hardware.
faceplate trim with the provided hardware.
15. Attach the faceplate trim to the back box by align-
ing the two serrated studs with two of the holes in
the edges of the back box and engaging the studs.
the edges of the back box and engaging the studs.
16. Operate the pan/tilt to verify that there are no ob-
structions or dragging cables within the back box
or dome.
or dome.
Figure 4. Pan/Tilt Mounting Detail
UPPER MOUNTING PLATE
INSIDE BACK COVER
INSIDE BACK COVER
SAFETY SPRING CLIP
ATTACHED TO COIL CORD
(CAN BE POSITIONED
180° FROM SHOWN)
ATTACHED TO COIL CORD
(CAN BE POSITIONED
180° FROM SHOWN)
LOWER MOUNTING PLATE
ATTACHED TO PAN AND TILT
ATTACHED TO PAN AND TILT