Справочник Пользователя для Pelco C2410M-1

 

10

C2410M-I  (1/06)

 

If you have a varifocal lens or fixed focal length lens with an auto iris, you can adjust the level setting 
to increase or decrease brightness.

 

.

 

To adjust the focus, it may be necessary to remove the heater board in order to loosen the locking 
screw on the bottom of the lens. 

To remove the heater board:

1. Disconnect the four-pin heater wiring.

2. Wait for the heater elements to cool if 

they are hot.

3. Apply pressure and press on the corner 

of the board.

To adjust the focus:

1. Loosen the locking screw on the bottom of the 

lens.

2. Move the screw in the slot to bring the picture 

into focus.

3. Retighten the locking screw.

4. Replace the heater board if it was removed.

5. Reconnect the four-pin heater wiring.

 

Heater elements could be hot! When camera power is on, use caution when 

adjusting the camera

VERTICAL PHASE
ADJUSTMENT

AUTO IRIS LEVEL
ADJUSTMENT

HEATER
BOARD

FOCUS
ADJUSTMENT
SCREW

ADJUSTMENT
SLOT

BOTTOM VIEW OF CAMERA WITH
HEATER BOARD REMOVED