Справочник Пользователя для Pelco C3432M-F

C3432M-F (6/08)

11

1. Attach an ICS110-AP adapter plate (not supplied) to a 4S electrical box. Use two 8-32 x 0.75-inch 

Phillips flat head screws (supplied with both the IP110 and the adapter plate).

2. Remove the two 8-32 x 0.375-inch Phillips pan head screws and washers to separate the cover from 

the back box.

3. Pull the cable/wires into the cover.

4. Attach the cover to the adapter plate with four 8-32 x 0.375-inch Phillips pan head screws (supplied 

with the adapter plate). Use stainless steel hardware when installing the system outdoors.

5. Install the camera module into the back box before installing the back box into the cover. Rotate the 

camera module to access the mounting holes inside the back box. Refer to Camera Module on 
page 19 for more information. 

6. Connect the cable/wires (refer to Wiring Tables on page 14 for information).

7. Reinstall the back box inside the cover. Use the two 8-32 x 0.375-inch Phillips pan head screws and 

washers (removed earlier) to secure the back box to the cover.

Figure 6. 4S Electrical Box Installation

8-32 X 0.375-INCH

PHILLIPS PAN HEAD

SCREWS WITH WASHERS

(SUPPLIED)

COVER

BACK BOX

8-32 X 0.375-INCH
PHILLIPS PAN
HEAD SCREWS
(SUPPLIED WITH
ICS110-AP)

CEILING/
WALL

4S STANDARD
ELECTRICAL BOX

8-32 X 0.75-INCH

PHILLIPS FLAT

HEAD SCREWS

(SUPPLIED)

ADAPTER PLATE
(ICS110-AP)