Справочник Пользователя для Pelonis FS40-G5

 

To assemble the fan, follow the instructions by referring to the parts diagram below.

  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

To assemble the base, refer to Figure 2: 
1.  Unpack the base and column parts from the packing box and loosen the 4 

screws.  

2.  Fix the column onto the base plate using the 4 sets of screws.  
3.  Unscrew and take off the Height Adjuster, mount the column, and screw the 

Height Adjuster to tighten the extension column to the desired height. 

To assemble the grills and fan blade, refer to Figure 3: 
1.  Unscrew the Spinner clockwise and the Plastic Nut counter clockwise and 

remove both of them. 

2.  Set the Rear grill in the proper position with the Handle up. 
3.  Screw on the Plastic Nut tightly to attach the Rear Grill. 
4.  Discard the Plastic Sleeve on the Motor Shaft. 
5.  Install the Fan Blade onto the Motor Shaft until it reaches the retaining pin. 
6.  Screw the Spinner onto the Motor Shaft counter clockwise. 
7.  Press the rim of the Front Grill onto the Rear Grill until the front grill is properly 

fitted. Secure both grills firmly by tightening the fan grill locking screws and 

nuts through the Clip. 

 

 

Screw 

Unscrew