Справочник Пользователя для Pelonis FS40-G5

To operate the fan manually, use the buttons on the Fan Control 
Panel (first, make sure the Remote Control is detached from the 

Fan Control Panel to access the buttons).   
ON/SPEED/OFF button: 

Press the ON/SPEED/OFF button to turn the fan ON, to change 

the speed from Low (L), Medium (M), or High (H), or to turn it OFF. 
TIMER button: 

Press the Timer button until the desired time of 1,2, or 4 hours is 

selected.  The fan will operate for the desired length of time chosen and then will 

shut off automatically.   To turn the Timer OFF, press the button until all of the timer 

lights are off. 

The Remote Control can be conveniently stored over the two plastic pins on the Fan 
Control Panel.  If the Remote was originally attached to the Fan Control Panel when 

the product was first purchased, remove it by lifting it so that  it detaches from the 

two plastic pins.    

INSTALLING BATTERIES FOR THE REMOTE   
1.  Press down on the battery compartment cover and 

slide it out. 

2.  Insert the batteries (not included), making sure 

that the positive terminals are facing the proper 

way. (Note: use size “AAA”manganese or 

alkaline batteries. Do not use rechargeable 

batteries). 

3.  Replace the cover. 

ON/OFF button: 

Press the ON/OFF button to turn the fan ON or OFF.

 

SPEED button: 

Press the SPEED button to change the fan speed from LOW 
(L), MEDIUM (M), or HIGH (H). 
TIMER button: 

(operates the same as the TIMER button function for Manual  

Control Operation above). 

 

Point the remote control at the receptor located on the fan control panel and press 

the desired button. The remote control will work at an angle of about 60 degrees 

between right and left from the receptor.  The batteries must be removed from the 

remote control before they are scrapped and safely disposed of. 

Turn the Height Adjustment Ring on the fan column counter clockwise.  Lift or lower 

the fan column to the desired height and turn the Height Adjustment Ring clockwise 

to secure tightly in place. 

Push the grills slightly up or down to the desired direction. 

This fan has additional features:  

• 

Thermal Fuse – turns the fan off if it overheats. 

• 

Convenient Carry Handle – allows for easy transport from room to room. 

If your fan fails to operate, please follow these instructions:  

• 

Be sure the fan is plugged in and that the electrical outlet is working 

properly. 

• 

Check for any obstruction.  If you find any obstruction, turn the fan “OFF”.  

Unplug the fan and carefully remove the obstruction.  Plug the fan in and 

turn it on again by referring to the OPERATING INSTRUCTIONS. 

 
NOTE:  IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE SEE THE WARRANTY 
INFORMATION FOR INSTRUCTIONS.  PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN 
YOURSELF.  DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR 
PERSONAL INJURY.  IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING 
TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.     

It is recommended that the fan be cleaned at least one time during the operating 

season in order to provide the optimum level of performance.  ALWAYS TURN THE 
POWER OFF AND UNPLUG THE FAN BEFORE CLEANING.  Be sure to save the box for 

off-season storage. 

• 

Turn the fan “OFF” and unplug it. 

• 

Clean the plastic parts with mild soap and a damp cloth. 

• 

Do not use any cleaning agents or detergents. 

• 

Never immerse the fan in water. 

• 

To dismantle the fan, reverse the assembly order. 

• 

Pack the fan in the original carton and store it in a cool and dry place. 

 

Model No.: FS40-G5 

Voltage: 120V, 60Hz 

 

Plastic Pin