Справочник Пользователя для Vermont Casting MEAD3EB

6

Model: LHEABSL

Models: LHE30SSB, LHE30SLB, LHE30SLGA

Examine contents of shipping carton. If any parts are 
missing or damaged, contact your local dealer before 
starting installation.
Surround Parts
Trim kit assembly
Trim mounting hood
Trim bottom (2) (not used on Montpelier Insert)
Trim deflector (not used on Montpelier Insert)
Hardware package

Install the Bevel Cast Trim Surround or Steel Sur-
round Panels after all other installation work has been 
completed, thoroughly checked, and tested for proper 
operation, leaks and installation requirements.
1.  Remove all plastic from trim kit.
2.  Before installing trim kit, LHEABSL, some modifica-

tions must be completed. Remove two (2) or four (4) 
wing nuts from the back of the trim kit and locate the 
trim mounting hood to the two (2) or four (4) outer 
holes. Fasten the wing nuts back in position. (Fig. 8)

KT386

Trim mounting

hood

5/1/03  djt

Wing Nut

Trim 
Mounting 
Hood

Use the Inner 
Mounting Holes

KT386

Fig. 8  Adjust trim mounting hood to correct hole location.

1.  Once the insert has been installed and tested for 

proper operation as directed, stand the Bevel Cast 
Trim Surround or Steel Surround Panels in front of 
the insert.

2.  Position the surround in front of the insert and with 

the help of an assistant, gently lift the surround up 
and over the top sheet metal flange, at the same 
time, align the bottom brackets through the slots on 
the side flanges. (Fig. 9)

3.  Adjust the surround, left to right, so there is an equal 

reveal on either side. Secure by applying downward 
pressure until the brackets have engaged onto the 
insert. (Fig. 9)

Assembly complete.

KT1015

install trim

3/08   djt

Top 
Flange

Side 
Flange

KT1015

Fig. 9   Lift surround up and over top flange and up and through side flange holes.