Справочник Пользователя для Vermont Casting MEAD3EB

8

2.  Attach the left corner trim to the mantel 

assembly using one (1) 1/4-20 x 5/8” hex 
head bolt and one (1) flat washer. (Fig. 
12)

3.  Attach the right corner trim to the mantel 

assembly using one (1) 1/4-20 x 5/8” hex 
head bolt and one (1) flat washer. (Fig. 
12)

4.  Attach the center trim to the mantel as-

sembly between the left and right ends 
using one (1) 1/4-20 x 5/8” hex head bolt 
and one (1) flat washer in the center of 
the mantel. (Fig. 12)

5.  Using four (4) flat washers and four (4) 

1/4-20 x 3/8” hex head bolts, attach the 
left corner trim and right corner trim to the 
center trim. (Fig. 12)

6.  Using a straight edge gently placed 

against the front edge of the mantel assembly, align 
the left, right and center mantels. Tighten all fasten-
ers snugly. Be careful not to over-tighten.

7.  Using four (4) flat washers and four (4) 1/4-20 x 3/8” 

hex head bolts, attach the trim columns to the left 
and right corner trims finger tight only. (Fig. 13)

8.  Using the measuring tape, measure between the 

columns to assure equal distance within the opening. 
First check the distance between columns near the 
top of the unit and then at the bottom of the columns. 
Adjust accordingly and securely tighten. 

������
�����������������
����

Left Corner Trim

Center Trim

3/8” Hex Head Bolt

Right Corner Trim

5/8” Hex Head Bolt

KT663a

�����
������������
����

Left Trim Column

Right Trim Column

3/8” Hex Head 

Bolts

Mantel Assembly

KT669