Справочник Пользователя для Teledyne gfc 7000ta

 

Teledyne Analytical Instruments 

53 

  Remove the set screw located in the top, center of the rear panel 
  Remove the screws fastening the top cover to the unit (four per side). 
  Slide the cover back and lift straight up . 

4.  Disconnect the current loop option PCA from the appropriate connector on the motherboard (see 

Figure 5-1). 

5.  Place a shunt between the leftmost two pins of the connector (see Figure 5-1). 

6.  Reattach the top case to the analyzer. 

7.  The analyzer is now ready to have a voltage-sensing, recording device attached to that output 

 
 

1 year’s supply of replacement of 47mm dia.  particulate filters 

1 full replacement’s volume of indicating soda-lime for the external CO

2

 scrubber 

included with options 51 & 53 (approximate active lifetime: 1 year) 

Options 42 C & 42D