Справочник Пользователя для Majestic Appliances 33LDVR

22

The top louvre panel 

is removed by lifting 

the panel vertically and 

pulling it away from the 

appliance. (Fig. 39) The 

lower access door is 

hinged along the bottom 

edge and is folded 

down to allow access.

1.  Turn the fireplace OFF (including the pilot)

2.  If the unit has been operating allow time for the 

components to cool.

3.  Remove the top louvre assembly.

4.  Open the lower louvre panel.

5.  Release the two clamps securing the lower edge of 

the window frame assembly by pulling down on the 

handles. (Fig. 40)

6.  Tilt the window frame assembly out slightly at the  

bottom, lift the window frame assembly up and away 

from the fireplace.

7.  To replace the window frame assembly reverse  

the procedure.

It is necessary to periodically clean glass. During start-

up condensation, which is normal, forms on the inside 

of the glass. This condensation causes lint, dust and 

other airborne particles to cling to glass surface.
Also initial paint curing may deposit a slight film on 

the glass. It is therefore recommended the glass be 

cleaned two or three times with a non-ammonia based 

household cleaner and warm water (We recommend 

gas fireplace glass cleaner) within the first few weeks of 

operation.
After the initial cleaning process the glass should be 

cleaned two or three times during each operating 

season depending on the environment in the house.

• 

The use of any non-approved replacement glass will 

void all product warranties.

• 

Care must be taken to avoid breakage of the glass.

• 

• 

1.

2.

FP1227

Louvre removal

11/02

Louvre

Glass Panel

FP1227

Fig. 39  Remove top louvre 

assembly.

FP1228

remove glass frame

11/02

Lower Clamps

Window 

Frame 

Assembly

Push 

Clamp 

Handle

Pull Clamp 

Hook

Window 

Frame 

Assembly

FP1228

Fig. 40  Window frame assembly removal.