Справочник Пользователя для Majestic Appliances 33LDVR

LDVR Series Direct Vent Gas Fireplace

10007317

1. Remove the top louvre assembly.
2. Open the bottom louvre.

3. Remove the window frame assembly.

4. Remove log box from inside ﬁrebox.

5. Unpack the logs from packaging and remove each

log from its wrapping material. Set aside the ember

and the lava rock bags.

As with all plastic bags - these are not toys

and should be kept away from children and

infants.

Installation of Logs, Lava Rock & Ember Material

Log Installation

33LDVR

1. Place rear log left (A41) on rear bracket (ensure the

notch on the left end locates against the bend up on

the left side of rear bracket.)

2. Place rear log right (A42) on rear bracket (ensure

the notch on the right end locates against the bend

up on the right side of rear bracket) and just rest the

cut out from front log onto the front support.

3. Place front log left (A43). Use the logʼs bottom hole

to locate it onto rear log left (A41) and just rest bot-

tom cut out log onto the front support.

4. Place top log center (A44). Use the logʼs bottom

hole to locate it onto the knob on the rear log right

(A42) and the top log center rest onto rear log left.

5. Place ember material on top of burner. Scatter the

ember material over the tiles on the front area of the

burner housing. (Fig. 48) Do not pack the ember

material. Separate it when unpacked and keep it

in a ﬂuffy and loose condition for a more realistic

ember effect.

LG382

36LDV logs

1/05

Rear Left

(A41)

Top Center

(A44)

Rear Right

(A42)

Front Left

(A43)

LG382

Fig. 41 Correct log placement for 33LDVR.

36LDVR

1. Place rear log (B135) on rear bracket (ensure log

is seated properly to the bracket and located to the

two pins), so it will not move from side to side and is

ﬁrmly positioned on the bracket.

2. Place front left log (B136). Use the logʼs bottom hole

to locate it onto the front support and just rest on top

of the rear log.

3. Place front right log (B137). Use the logʼs bottom

hole to locate it onto the front support and the top

hole to the knob onto the rear log.

4. Place front center log (B138) on top of the two small

shelves at the front log support and between the left

and right logs.

5. Place ember material on top of burner. Scatter the

ember material over the tiles on the front area of the

burner housing. (Fig. 49) Do not pack the ember

material. Separate it when unpacked and keep it in a

ﬂuffy and loose condition for a more realistic ember

effect.

6. Scatter the lava rock material around the ﬁrebox

base.

Do not place any of the lava rock material

on the burner housing assembly.

The logs are fragile and should be handled

with care. Keep the packaging material out

of the reach of children and dispose of the

material in a safe manner.

The individual logs can be easily identiﬁed

by the numbers cast on the underside of

each log.

Log Identiﬁcation Chart

Location

33LDVR 36LDVR 39LDVR 43LDVR

Front Left

A43

B136

BC15

BD16

Front Right

B137

BC16

BD17

Front Center

B138

Rear

B135

BC14

BD15