Справочник Пользователя для Friedrich ZQ05B10

—4—

1. When servicing, set the ROTARY SWITCH to 

Off and unplug the power cord. 

2. Observe the original lead dress. 

If a short circuit is found, replace all parts which
have been overheated or damaged by the short cir-
cuit. 

3. After servicing, make an insulation resistance test

to prevent the customer from being exposed to
shock hazards. 

1. Unplug the power cord and connect a jumper

between 2 pins (black and white). 

2. The grounding conductor (green or green and yel-

low) is to be open. 

3. Measure the resistance value with an ohm meter

between the jumpered lead and each exposed
metallic part on the equipment at all position
[except Off] of the ROTARY SWITCH. 

4. The value should be over 1 M

Ω

.

CAUTION : After switching the air conditioner from Cool to Off or Fan, wait at least 3 minutes before switching it

back to Cool.

Off

: Turns air conditioner off.

Hi Fan

: High speed fan operation without

cooling.

Lo Fan

: Low speed fan operation without

cooling.

Hi Cool

: Cooling with high speed fan 

operation.

Lo Cool

: Cooling with low speed fan 

operation.

This automatically controls the temperature of the 
indoor air. 
Turn the knob so that the arrow points to the 
larger marks for greater cooling. Point the arrow to
the smaller marks for more moderate cooling. 
(i.e. the higher the number, the greater the 
cooling)

Hi

Fan

Lo

Fan

Hi

Cool

Off

Lo

Cool