Справочник Пользователя для Toshiba RAV-SP420CT-UL

Toshiba

„

Decide the position which remote control is operated 
and the installation place.
And then refer to the Installation Manual of the wireless 
remote controller kit sold separately.
(The signal of the wireless type remote control can be 
received within approx. 23’ (7 m). This distance is a 
criterion and varies a little according to capacity of the 
battery, etc.)
• To prevent malfunction, select a place where is not 

affected by a fluorescent lamp or direct sunlight.

• Two or more (up to 6 units) wireless-type indoor units 

can be set in a room.

„

Slide the suction grille fixing knobs (2 positions) 
toward the arrow direction, and then open the
suction grille.
Under the condition of suction grille opened, push 
the hook section of hinges (2 positions) at the rear 
side, and then pull out the suction grille.

Remove the screws (2 pcs.) which are fixing the 
wire guard.
Remove the clamp fixing screws and remove the 
wire guard.

Attach back the wire guard once indoor unit is installed.
Remove the 2 screws fixing the wire guard and hung the 
wire guard with the clamps during a service.

Ap

pro

x. 2

3’ (

7 m

)

Pull out suction grille 

while pushing hook.

Suction grille 

fixing knob

Suction grille

Hinge

Slid

e

Clamps

Screw

Wire guard

+00EH99864801_00Ta.book  Page 6  Tuesday, November 24, 2009  5:40 PM