Справочник Пользователя для Quadra-Fire 31M-ACC-MBK

March 2, 2007

7033-277C

Page  35

R

1.  Remove the right side shield by removing 2 screws in the 

back using a Phillips head screw driver.

2.  Remove 4 screws from channel access cover and remove 

cover.

3. Locate 2 channel nuts inside of chamber and remove 

using a 7/16 socket wrench.  Slide out tube channel 
assembly.

NOTE: Soak the bolts with penetrating oil for at least 15 min-

utes before trying to remove them.

1. Slide the tube channel assembly into side of fi rebox and 

insert each tube into the corresponding hole in the tube 
channel rack starting with the back hole fi rst.

2. Make sure tube channel assembly is fl ush against the 

side of the stove and secure with channel nuts.

3.  Re-install channel cover and side shield.

Channel
Access
Cover

Channel
Nuts (2)

Side Panel

Tube Channel
Assembly

Channel Cover
Screws (4)

Tube Channel Rack

Remove
2 Screws

In order to replace the tube channel assembly a clear-
ance of 19 inches (483mm) is required on the right side 
of stove in order to remove the tubes with the stove in 
place.  If space is not available, the stove will have to be 
disconnected from the chimney to proceed with the tube 
replacement.