Справочник Пользователя для Siemens CFVA-IP

7. Place the camera body on the IP-Module and screw both units together using 

the two screws supplied. 

8. Connect the LAN cable to the RJ45 socket (7). 
9. Connect the (12 V DC / 24 V AC) electrical supply (8). 

 

 

 

 

Ensure correct polarity if using a 12 V DC supply, as incorrect connection may 
damage the dome camera or cause the unit to operate abnormally. 

 

 

10. Establish communication with the device for the first time. See section 7: 

11. A test monitor can be connected to the BNC socket (6) when configuring the 

camera. 

12. Configure the dome camera as required. Refer to the dome camera manual for 

set-up instructions. 

13. Place the dome back on the camera and screw it in position. 

 

 

 

 

Clean the dome after installation using a soft, lint-free cloth to remove dust and greasy finger marks. 

 

 

 

 

Fig. 2 

Exploded view of IP-Module CVVA-IP 

12 

Siemens Building Technologies 

 

Fire Safety & Security Products