Справочник Пользователя для Mitsubishi Electronics 838 SERIES

If prompted for a name, 
highlight a name for the 
device and press 

ENTER to 

add a check.  The device 
itself may later override the 
name assigned.

Highlight 

On and press 

ENTER to add a check.

Highlight 

EXIT and press ENTER to close the New 

Device Found screen.

Note:  At any time after completing Auto Input Sens-

ing, you can set the TV’s HDMI control on or off 
in the 

Inputs > HDMI Control menu.

838 Series.  To supplement HDMI control with 
NetCommand IR control, see page 64.

Many new HDMI devices have a feature called Con-
sumer Electronics Control (CEC) or HDMI Control.  
HDMI Control allows one device, such as the TV, to 
control other devices, such as an A/V receiver or disc 
player.  Use of CEC is optional.

Each manufacturer chooses which CEC functions to 
support so it is difficult to predict which devices and 
features are compatible with Mitsubishi’s HDMI Control.  
You may find that CEC functions for a specific device are 
limited.

To use HDMI Control, you must enable it in both 
the TV and the device.
•

In the TV.  Enable HDMI control from the New 
Device Found screen or from the Inputs > HDMI 
Control menu.

•

In the Device.  Most devices with HDMI CEC com-
patibility let you turn it on or off in the device menus, 
where it is typically listed as “HDMI Control.”

To ensure proper detection
•  Power on HDMI devices before connecting them to 

the TV.

•  Connect and set up HDMI devices one at a time.

Power on the device and allow it to complete the 
power-on sequence (boot up).  Stop any playback.

Connect the device to one of the TV’s HDMI inputs.

When the TV detects the connection, the 

Device Found screen will appear.

Note: See 

HDMI Control Option” on this page if there is no 
HDMI Control option.

If the New Device Found Screen 
Has No HDMI Control Option

If the 

New Device Found screen shows no option for 

HDMI Control, one of these conditions applies:
•

HDMI Control is turned off in the menus of the 
new device
Action:
a.  Highlight EXIT and press ENTER to close the 

New Device Found screen.

b.  Display the device’s setup menus and enable 

the device’s CEC capabilities.

c.  Wait for the TV’s New Device Found screen 

to appear again.

d.  If the New Device Found screen does not 

appear, power off the device.  Power on the 
device and wait for the 

New Device Found 

screen to display with the HDMI Control 
option.

•

The HDMI cable cannot support CEC
Action:
Upgrade your HDMI cable to one that supports 
CEC.

•

 

-

Control the device with its own remote 
control or program the TV’s remote control to 
operate the device.

 

-

838 Series.  Use the TV’s NetCommand IR 
control (page 64).