Справочник Пользователя для Mitsubishi Electronics 838 SERIES

As an example of using HDMI Control, press 

PLAY on 

the device itself to:
•  Power on the TV
•  Switch to the device (no need to display the 

Input Selection menu)

•  Begin play of the device

Direct Keys
Test your equipment with the TV’s remote control to 
find additional supported commands.  See the table 
below for commands that may be available, depending 
on the individual device.

        

Digits 

0–9, 

Check the 
TOOLS menu 
for supported 
functions.

CANCEL 

(to cancel)

If you have a CEC-enabled A/V receiver, CEC-enabled 
devices connected to the A/V receiver with an HDMI 
cable may also be controllable.  They can be selected 
from the TV’s 

Input Selection menu.

CEC-enabled A/V receiver functions that may be 
available:
•  Try the 

VOL, MUTE, and menu-navigation keys.

•  To open the A/V receiver menu, follow these steps:

1.  While watching TV, press AUDIO.
2.  Press   until the TV Speakers option displays.
3.  Press   to select Off (to send audio to the A/V 

receiver).

4.  Press INPUT and highlight the A/V receiver icon 

in the 

Input Selection menu.

5.  Press TOOLS.
6.  Select Menu from the Tools menu.

Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other 
devices.  If control conflicts arise, you can:
•  Turn off TV control of an individual CEC-enabled 

device (see below).

•  Turn off CEC in the setup menu of one of the 

devices.

Press 

MENU on the TV remote control.

Highlight 

Inputs > HDMI Control.

Move to the device name and press 

ENTER to select 

Off to turn off the TV’s ability to control the device.

Press 

EXIT to clear the menu.

Power off the device.

Disconnect the HDMI cable.

Press 

MENU on the TV remote control to enter the 

TV main menu.

Go to 

Inputs > Name.

Highlight the HDMI input name and press 

ENTER to 

select 

Delete.

Press 

EXIT to clear the menus.