Справочник Пользователя для JVC SP-PWR1

Masterpage:Right+

Filename [TH-R1R3EU_05Name.fm]

Page 24Monday, 28 March 2005  21:23

By setting the crossover frequency, frequencies lower than the 
frequency being set is output from the subwoofer.

Press SETTING.
The item of the setting performed most recently is displayed on 
the front display panel.

Press 

F or G to display ACROSS :B on the front display panel.

Press 

D or E to select the frequency.

Select one of the crossover frequency according to size of the 
connected speaker.

You can enjoy powerful sounds at night by setting the midnight 
mode.

Press SETTING.
The item of the setting performed most recently is displayed on 
the front display panel.

Press 

F or G to display ANIGHT :B on the front display panel.

Press 

D or E to select the mode.

Select one of the following modes.

80Hz

Select this when using cone speaker that is about 
12 cm.

100Hz

Select this when using cone speaker that is about 
10 cm.

120Hz

Select this when using cone speaker that is about 
8 cm.

150Hz

Select this when using cone speaker that is about 
6 cm. (Default)

200Hz

Select this when using cone speaker that is about 
5 cm.

Each time you press 

D or E, the display changes as follows:

80HzN100HzN120HzN150HzN200HzN (back to the 
beginning)

Select this when you want to reduce the 
dynamic range slightly.

Select this when you want to maximise the 
compression effect. (Ideal for midnight)

Select this when playing back using full 
dynamic range. (Midnight mode not 
activated) (Default)

Each time you press 

D or E, the display changes as follows:

NIGHT : 1NNIGHT : 2NNIGHT : OFFN (back to the beginning)

TH-R1R3EU_00.book  Page 24  Monday, March 28, 2005  9:23 PM