Справочник Пользователя для JVC SP-PWR1

Masterpage:Right+

Filename [TH-R1R3EU_06DVD Operation.fm]

Page 26Monday, 28 March 2005  21:23

There is a time limit when performing the following setting. If the 
time is up before completing the setting, re-perform from the 
beginning.

The volume is always set to the lowest level before operation starts 
no matter what source (sound source) is to be played back.
If the volume is set at its high level, the sudden blast of sound 
energy may impair your hearing or damage your speakers.

Press VOL +/– on the remote control.
+ : To increase the volume.
- : To turn down the volume.

Adjust with the speaker output adjustment buttons for each 
speaker.

●

Press CENTER +/– to adjust the centre speaker.

●

Press L +/– to adjust the left front speaker.

●

Press R +/– to adjust the right front speaker.

●

Press SHIFT and S. WFR +/– to adjust the subwoofer.

●

Press SHIFT and SURR. L +/– to adjust the left surround 
speaker.

●

Press SHIFT and SURR. R +/– to adjust the right surround 
speaker.

●

Adjustment cannot be made for speakers whose indication is not 
lighted.
During SURR OFF: C, SL and SR not adjustable.
During AUTO SURR (with 2-channel signal input): C, SL and SR 
not adjustable.

During HEADPHONE: Not adjustable except for L and R.
During TV DIRECT: All speakers not adjustable.

You can enjoy stereo software as well as multi-channel software 
through the headphones. (Sounds are down-mixed to the front 
channels while playing multi-channel software.)
Connect the headphones to the headphone jack [PHONES] on the 
front panel of the centre unit.

●

If Surround is activated, 

A3D H PHONEB lights up for a few 

ADSPB lights on the front display panel.

●

If Surround is deactivated, 

AHEADPHONEB lights up for a few 

seconds on the front display panel.

●

When the headphone is inserted, the unit switches between 
A3D H PHONEB mode and AHEADPHONEB mode each time 
SURROUND is pressed.

●

There is no sound output from the speakers when the headphone 
is inserted.

●

Turn on the unit.

●

Turn on the TV and select an input mode such as EXT1.

●

Set the remote control selector switch to AUDIO.

●

Press DVD on the remote control.

SAT

TV

AUDIO

Can be set from -6 dB to 
+6 dB in 1 dB interval.

Speaker

ATTENTION:
Be sure to turn down the volume;

●

before connecting or putting on the headphones, as high 
volume may damage both the headphones and your hearing.

●

before removing the headphones, as high volume will result in 
a full blast from the speakers.

3D Headphone Mode^3D H PHONE
You can also enjoy the Surround mode through the 
headphones.
If Surround is activated, 3D headphone mode will be activated 
regardless of the software type being played.
A3D H PHONEB and ADSPB light on the front display panel.

TH-R1R3EU_00.book  Page 26  Monday, March 28, 2005  9:23 PM