Справочник Пользователя для Shark SV7729N
1. Dust Cup Container
2. Dust Cup Filter
3. Dust Cup Release Switch
4. Charging Indicator
5. On/Off Switch
6. Main Unit
7. Charging Adapter
8. Crevice Tool
9. Dusting Brush
2. Dust Cup Filter
3. Dust Cup Release Switch
4. Charging Indicator
5. On/Off Switch
6. Main Unit
7. Charging Adapter
8. Crevice Tool
9. Dusting Brush
2
NOTE:
Your cordless vacuum is shipped with the batteries
uncharged. Charging of the unit for 20 hours prior to
first use is required.
uncharged. Charging of the unit for 20 hours prior to
first use is required.
PARTS AND COMPONENTS
Using Your Cordless Vacuum
1. Unplug unit from charger.
2. To start the unit, slide the "On/Off"
2. To start the unit, slide the "On/Off"
switch to the "On" position.
3. To stop the vauum cleaner, slide
the "On/Off" switch to the "Off"
position.
position.
4. A crevice tool is provided for
cleaning narrow, hard to reach
places. A dusting brush is provided
for cleaning upholstery, furniture,
etc.
places. A dusting brush is provided
for cleaning upholstery, furniture,
etc.
OPERATING INSTRUCTIONS
Changing & Cleaning the Dust
Cup Filter
Cup Filter
To achieve the best performance,
empty the dust cup container and
clean the dust cup filter after each
use.
1. To remove the dust cup container,
empty the dust cup container and
clean the dust cup filter after each
use.
1. To remove the dust cup container,
press down on the dust cup release
button and pull off the dust cup
container.
button and pull off the dust cup
container.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup
3. Empty the dust from the dust cup
container. (Fig. 6)
Fig. 6
5
Assembly
Note: Dust cup filter must always be
used when operating the hand
vacuum.
1. To open the dust cup compartment,
used when operating the hand
vacuum.
1. To open the dust cup compartment,
push the dust cup release button
and remove the dust cup container.
(Fig. 2)
and remove the dust cup container.
(Fig. 2)
2. Verify that the dust cup filter is
inside, then re-attach the dust cup
container to the hand vacuum.
(Fig. 3)
container to the hand vacuum.
(Fig. 3)
Dust Cup Release Button
Fig. 2
Fig. 3
3. To attach the crevice tool or the
dusting brush to the hand vacuum,
push the attachment into the
suction hole in the front of the dust
container. (Fig. 4 & Fig. 5)
push the attachment into the
suction hole in the front of the dust
container. (Fig. 4 & Fig. 5)
Fig. 5
Fig. 4
4. Rinse the dust cup filter in cold water,
and then wait until it dries completely
before replacing it back into the dust
cup container. Do not use a washing
machine to clean the dust cup filter.
Do not use a hair dryer to dry it. Air
dry only.
before replacing it back into the dust
cup container. Do not use a washing
machine to clean the dust cup filter.
Do not use a hair dryer to dry it. Air
dry only.
5. Replace the dust cup filter carefully
into the dust cup compartment.
NEVER operate vacuum cleaner
without dust cup filter in place.
NEVER operate vacuum cleaner
without dust cup filter in place.
6. Attach the dust cup container to the
cordless vacuum.
Note: It is recommended that the dust
cup filter be replaced every three (3)
months to ensure peak performance of
the unit.
cup filter be replaced every three (3)
months to ensure peak performance of
the unit.
CAUTION:
The suction inlet must be
open and free of any obstructions at all
times. Otherwise, the motor will
overheat and could become damaged.
times. Otherwise, the motor will
overheat and could become damaged.