Справочник Пользователя для Shark MV3010

TOLL FREE: 1-800-798-7398

  When the vacuum nozzle head is firmly in place, 

twist the quick release cord holder to unwrap 
the power cord completely. Plug in the unit. The 
carpet light (on the left hand side of the floor 
nozzle when standing behind the unit) will begin 
to blink blue. (Fig. 5) The vacuum is in standby 
mode.

  To begin vacuuming, step on the foot pedal and 

the carpet light on the vacuum nozzle will be 
solid blue. (Fig. 6) Place your foot lightly on the 
top of the vacuum nozzle and tilt the handle 
back to begin vacuuming.  
To switch to vacuuming in bare floor mode, step 
on the pedal once more. The bare floor light will 
now be solid blue. (Fig. 7)  
To return to standby mode, step on the pedal 
once more.

NOTE: If the unit is jammed both bare floor 
and carpet lights will begin to blink blue. Please 
reference the troubleshooting guide for more 
information.

  QUICK TIP: The vacuum can be switched 

from carpet to bare floor mode while actively 
vacuuming or while the unit is at rest. Switching 
to bare floor mode will disengage the brush roll.

 

To use the crevice tool or the dusting brush:

  Remove the accessory hose from the back of the 

unit by turning the hose to the left or right to 
unlock. (Fig. 8) 

  Insert the crevice/brush combo tool onto the end 

of the hose. (Fig. 9) To use it as a crevice tool, 
press the latch on the crevice nozzle and slide 
the brush down to expose the crevice nozzle. 

  To replace the accessory hose back into the 

vacuum, remove the accessories and insert the 
hose into the back of the vacuum. Push down to 
lock. (Fig. 10) 

MV3010_40_ENG_IB_120703_1.indd   4

12-07-03   9:15 AM