Справочник Пользователя для Shark MV3010
5
www.sharkclean.com
EMPTYING THE DUST CUP
1
Press the dust cup release button on the top
of the unit. Pull the dust cup out of the unit by
pulling forward on the handle. (Fig. 11)
pulling forward on the handle. (Fig. 11)
2
Hold the dust cup over a trash receptacle and
press the button at the bottom of the dust cup to
empty the dust cup. (Fig. 12)
empty the dust cup. (Fig. 12)
3
Close the bottom trap door and replace the dust
cup into the unit.
4
To replace the dust cup into the unit, gently push
the dust cup assembly down and in. The dust
cup will click into place.
cup will click into place.
For best results empty the Dust Cup after
each use; empty several times during
prolonged usage or when it reaches the
MAX fill line.
NEVER OVER-FILL THE DUST CUP.
each use; empty several times during
prolonged usage or when it reaches the
MAX fill line.
NEVER OVER-FILL THE DUST CUP.
Always unplug the vacuum from
the electrical outlet before removing and
emptying the dust cup.
emptying the dust cup.
CAUTION:
Unplug the vacuum;
failure to do so might
result in electric
shock.
Unplug the vacuum;
failure to do so might
result in electric
shock.
Fig. 11
Fig. 12
Fig. 13
EMPTYING THE DUST SCREEN
Over time the debris may gather in the dust
screen of your Vac-OR-Steam
™
. Clean the dust
screen often for optimal suction performance.
1
To clean the dust screen, press the top dust cup
lid latch to access the dust screen and remove
built-up debris as required. (Fig. 13, Fig. 14)
built-up debris as required. (Fig. 13, Fig. 14)
2
Place the dust screen back into the unit and
close the dust cup lid. You will hear an audible
click when the dust cup lid is closed and secure.
click when the dust cup lid is closed and secure.
3
To replace the dust cup into the unit, gently push
the dust cup assembly down and in. The dust
cup will click into place.
cup will click into place.
Fig. 14
Dust Cup
Release
MV3010_40_ENG_IB_120703_1.indd 5
12-07-03 9:15 AM