Справочник Пользователя для Rheem 260 Litre

Скачать
Страница из 40
REGULAR CARE 
10 
EXPANSION CONTROL VALVE 
In many areas, including South Australia, Western Australia and scaling water 
areas, an expansion control valve is fitted to the cold water line to the water 
heater. Water will flow from its drain line during the heating period. 
 
Operate the easing lever on the expansion control valve once every six 
months.  It is very important you raise and lower the lever gently. The 
expansion control valve should be checked for performance or replaced at 
intervals not exceeding 5 years, or more frequently in areas where there is a 
high incidence of water deposits. 
 
SERVICING 
For safe and efficient operation, the water heater should be serviced annually 
by your nearest Rheem Service Department or their Accredited Service Agent. 
Only genuine replacement parts should be used on this water heater. 
 
Warning: Servicing of a gas water heater should only be carried out by 
authorised personnel. 
 
In commercial applications where large volumes of hot water are used, 
sediment may build up on the bottom of the cylinder and reduce the heating 
efficiency. In extreme cases, particularly in areas of high water sediment, 
draining and flushing out may be necessary. Contact your plumber to drain and 
flush the water heater.