Краткое Руководство По Установке для Brother 885V95

Скачать
Страница из 196
92
UTILITY STITCHES
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
■ Sewing buttonholes on stretch fabrics
When sewing buttonholes on stretch or loosely 
woven fabrics, use a gimp thread.
a
Hook the gimp thread onto the part of 
buttonhole foot "A" shown in the illustration.
b
It fits into the grooves, and then loosely tie it.
c
Attach buttonhole foot "A".
• For details on replacing the presser foot, refer 
to "Replacing the presser foot" (page 43).
d
Select stitch 
52 
or
 53
.
e
Adjust the stitch width to the thickness of the 
gimp thread.
f
Lower the presser foot lever and the 
buttonhole lever, and then start sewing.
g
When sewing is finished, gently pull the gimp 
thread to remove any slack.
h
Use a handsewing needle to pull the gimp 
thread to the wrong side of the fabric, and 
then tie it.
Button sewing
Buttons can be sewn on with the sewing machine. 
Buttons with two or with four holes can be attached.
a
Measure the distance between the holes in the 
button to be attached.
b
Raise the presser foot lever, and then slide the 
drop feed lever, located at the rear of the 
machine on the base, to
(to the left as seen 
from the rear of the machine).
a Drop feed lever (as seen from the rear of the 
machine)
X
The feed dogs are lowered.
c
Attach button-fitting foot "M".
• For details on replacing the presser foot, refer 
to "Replacing the presser foot" (page 43).
d
Select stitch 
61
 .
• For details, refer to "Selecting stitching" (page 
51).
Note
z Since the end of the thread will be tied off 
later, do not set the sewing machine for 
programmed-thread cutting.
a