Справочник Пользователя для ONKYO TX-NR5010

You can program the remote controller’s ACTIVITIES to 
perform a sequence of remote control actions.
Example:
To play a CD you typically need to perform the following 
actions:
1. Press RECEIVER to select the Receiver remote 

controller mode.

2. Press 

8RECEIVER to turn on the AV receiver.

3. Press TV/CD to select the TV/CD input source.

4. Press 

1 to start playback on the CD player.

You can program ACTIVITIES so that all four actions are 
performed with just one button press.

Each ACTIVITIES can store one macro, and each macro 
can contain up to 32 commands.

• MODE cannot be operated during the macro-making process.
• Once you assign new macro commands, the previously registered 

macro will no longer work. If you wish to retrieve it, you will 
have to reassign the commands with the macro-making.

• When Normal macros are deleted, ACTIVITIES are restored to 

their default settings, namely the Easy macro commands 
(

• When using Normal macros, Easy macros cannot be used, which 

includes changing the source components.

Press the buttons whose actions you want to 
program into the macro in the order you want 
them performed.
For the CD example above, you would press the 
following buttons: 

8RECEIVER, TV/CD, 1.

ACTIVITIES button flashes twice.
If you enter 32 commands, the process will finish 
automatically.

The commands in the macro are transmitted in the 
order in which they were programmed. Keep the 
remote controller pointed at the AV receiver until all 
of the commands have been transmitted.
Macros can be run at any time, regardless of the 
current remote controller mode.

ALL OFF flashes twice.