Справочник Пользователя для Marantz SR4500

Frequency scan step for AM is selectable.
Default setup is 9 kHz step, if your country’s
standard is 10 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.

• Preset memory for the tuner will clear by changing

this setup.

To select tuner and desired band (FM or AM),
press the BAND button on the front panel.

Press the   or   cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.

Automatic searching begins then stops when
a station is tuned in.

To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.

Press the 

5

5

5

5

5 or 6

6

6

6

6

for more than 1 second on

the remote.

Automatic searching begins then stops when
a station is tuned in.

If tuning does not stop at the desired station, use
to the “Manual tuning” operation.

To select tuner and desired band (FM or AM),
press the BAND button on the front panel

Press the   or   cursor buttons on the front
panel to select the desired station.

To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.

Press the 

5

5

5

5

5 or 6

6

6

6

6 on the remote to tune in the

desired station.

To select tuner and desired band (FM or AM),
press the TUNER  button twice within two
seconds on the remote.

Press the F.DIRECT on the remote, display will
show “FREQ - - - -”.

Input your desired station’s frequency with the
numeric buttons on the remote.

The desired station will automatically be tuned.

When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The “ST” indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
“TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the
station in stereo. In such a case, press the T-MODE
button on the front panel or remote.
“AUTO” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “ST”
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE  button on the remote again.
AUTO indicator is illuminated on the display.

With this unit you can preset up to 50 FM/AM stations
in any order.
For each station, you can memorize the frequency
and reception mode if desired.

This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.

To select FM , press the BAND button on the
front panel.

While pressing the MEMO button, press the 
cursor button.
“AUTO PRESET” will appear on the display,
and scanning starts from the lowest frequency.

Each time the tuner finds a station, scanning
will pause and the station will be played for five
seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.

If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the

 cursor button during this period, this station

is skipped and auto presetting continues.

Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.

Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).

Press the MEMO button on the front panel. “– –“
(preset number) starts blinking on the display.

Select the preset number by pressing the   or

 cursor buttons, while this is still blinking

(approx. 5 seconds)

Press the MEMO button again to enter. The
display stops blinking.
The station is now stored in the specified
preset memory location.

AAC

AAC

AAC

AAC

0

3

2

1

6

5

4

9

8

0

7

3

2

1

6

5

4

9

8

0

7

ENTER

AAC

0

SR4500N DFU_01_ENG 2_2

04.5.20, 11:09 AM

Page 30

Adobe PageMaker 6.5J/PPC