Справочник Пользователя для Chauvet 360Z-LED

Operation

-10-

Q-Wash 360Z-LED User Manual Rev. 01g

Continued from previous page

Master/Slave

The Master/Slave mode allows a group of Q-Wash 360Z-LED fixtures (the slaves) to
simultaneously duplicate the output of another Q-Wash 360Z-LED (the master), whether
static mode settings or auto/custom programs, without a DMX controller.

1) Set the master unit:

a) Select a stand-alone mode, as indicated above.

2) Set each of the slave units:

a) Go to MENU > INTRO > RUN.
b) Select SLAVE.

· Do not connect a DMX controller to the master or slave fixtures.
· The master unit should be the first in the DMX string.

Display Mode

This mode defines how the LCD’s backlight will work.

1) Go to MENU > INTRO > DISPLAY.

2) Select a display mode (60 CLOSE or BRIGHT).

· When in the “60 CLOSE” setting, the LCD’s backlight will turn off after 60 s.
· When in the “BRIGHT” setting, the LCD’s backlight will stay on.

Software Version

This option will show the installed software version.

1) Go to MENU > INTRO > INFO.

2) The display will show Edition.

3) Press <ENTER> to see the installed software version.

Keylock

This option enables or disables the LCD key.

1) Go to MENU > INTRO > KEYLOCK.

2) Select YES or NO.

When in the “YES” setting, the user will have to enter the password after 30 seconds
of control panel inactivity or each time he/she turns the fixture on.

The default (non-modifiable) password is
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.

Fan

You can select the fan operation mode, as follows:

1) Go to MENU > INTRO > FAN.

2) Select HIGH, NORMAL, LOW, or AUTO.

The fixture’s controller will force the fan to High if the fixture’s internal temperature
becomes too high, despite any manual or DMX setting.

Reset

This option allows you to reset all custom settings to their default values.

1) Go to MENU > INTRO > RESET.

2) Select YES or NO.

Continues on the next page