Справочник Пользователя для JVC UX-G5

 

• If you store a new station into an occupied preset number, 

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure 

occurs, the preset stations will be erased in a few days. If 
this happens, preset the stations again.

 

• When using an 8 cm disc, place it on the inner circle of the 

disc tray.

• This System cannot play “packet write” discs.
• For MP3 playback...

– MP3 discs are required a longer readout time than regular 

CDs. (It depends on the complexity of the group/file 
configuration.)

– Some MP3 files cannot be played back and will be 

skipped. This result from their recording processes and 
conditions.

– When making MP3 discs, use ISO 9660 Level 1 or Level 

2 for the disc format.

– This System can play back MP3 files with the extension 

code <.mp3> (regardless of the letter case—upper/
lower).

– Some characters or symbols will not be shown correctly 

on the display.
The maximum character number shown on the display is 
32 (without the extension code) for files, and 30 for ID3 
tag.

– It is recommended that you make each MP3 file at a 

sampling rate of 44.1 kHz and at bit rate of 128 kbps.

– This System can recognize the total of 500 tracks and of 

200 groups. Those exceeding the maximum number 
cannot be recognized.

– Playback order of MP3 tracks may be different from the 

one you have intended while recording. If a folder does 
not include MP3 tracks, they are ignored.

 

Ex.: When CD 2 is selected:

CD 2 -> CD 3 -> CD 4 -> CD 5 -> CD 1 
(then selects CD 2, and stops)

* When no disc is loaded on the tray, that disc number is 

skipped.
You can exchange discs while playing or selecting another 
disc.

 

• It is not recommended to use the C-120 or longer tapes. 

These tapes easily jams in the pinch rollers and capstans, 
and may cause characteristic deterioration.

 

• Be sure to turn down the volume before connecting or 

putting the headphones.

 

• This function also affects the sound through the 

headphones.

• SOUND TURBO and AHB PRO cannot be used at the 

same time.

 

• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this 

happens, reset the clock.

 

• Auto Standby cannot be canceled by the following 

operations.
– Changing the display brightness.
– Adjusting the volume.
– Adjusting the sound.

 

• If you try to program a 33rd track, “FULL” appears on the 

display.

• While programming steps...

Your entry will be ignored if you have tried to program an 
item number that does not exist on the disc (for example, 
selecting track 14 on a disc that only has 12 tracks).

 

• The recording level is automatically set correctly. Thus, 

you can adjust the sound you are actually listening to 
without affecting the recording level.

• There is leader tape which cannot be recorded onto at the 

start and end of cassette tapes. Thus, when recording CDs 
or radio broadcasts, wind the leader tape first to ensure that 
the recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO 

TAPE” appears on the display. If a protected tape has been 
inserted, “NO REC” appears.

• When using Reverse mode for recording, start recording in 

the forward (

3

 

) direction first; otherwise, recording will 

stop when only one side (reverse) of the tape is recorded.

• You can also change Reverse mode setting (

 and 

) 

after starting recording.

 

• If you open the current disc tray while recording, the 

recording is stopped.

• When the disc reaches to its end before the tape ends, the 

unit starts playback next disc and continues recording.

UX-G5[UJ].book Page 22 Friday, June 10, 2005 1:07 PM