Справочник Пользователя для Pelco C2458M-F

C2458M-F  (4/11)

7

To install the IPS-CABLE to computers with a 9-pin serial connection, refer to Figure 1 and perform the 
following steps: 

1. Connect a null modem cable (not supplied) to the COM1 or COM2 serial port on the computer. 

2. Connect the 9-pin male connector from the IPS-CABLE (supplied) to the null modem cable.

3. Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.

NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source. 

Figure 1. IPS-CABLE Installation with 9-Pin Serial Connection

COM 1

COMPUTER

IPS-CABLE

OR

COM 2

CONNECT TO 
COM 1 OR COM 2 
ON COMPUTER

NULL MODEM CABLE
(NOT SUPPLIED)

DB-9
MALE

BNC CONNECTOR 
TO VIDEO INPUT 
ON MONITOR

RJ-45 PORT 
OF SPECTRA   

RJ-45 PORT
OF PS-RDPE-2

CONNECT

TO