Справочник Пользователя для Pelco C2458M-F

8

C2458M-F  (4/11)

To install the IPS-CABLE to computers with a USB connection, refer to Figure 2 and perform the following 
steps:

1. Connect the USB-to-serial portable adapter cable (supplied) to the USB port on the computer, and 

then connect it to the male-to-male adapter (supplied).

2. Connect the 9-pin male connector from the IPS-CABLE (supplied) to the male-to-male adapter, and 

then connect it to the USB-to-serial portable adapter cable.

3. Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.

NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source. 

Figure 2. IPS-CABLE Installation with USB Connection

COMPUTER

IPS-CABLE

MALE-TO-MALE ADAPTER 

OR

CONNECT TO 
USB PORT ON 
COMPUTER

BNC CONNECTOR 
TO VIDEO INPUT 
ON MONITOR

DB-9
MALE

CONNECT

TO

RJ-45 PORT 
OF SPECTRA   

RJ-45 PORT
OF PS-RDPE-2

USB-TO-SERIAL PORTABLE
ADAPTER CABLE